Powereagle as the professional manufacturer, we would like to provide you high quality 130-200W Medical Open Frame. And we will offer you the best after-sale service and timely delivery.
Powereagle as a professional high quality 130-200W Medical Open Frame manufacturer, you can rest assured to buy 130-200W Medical Open Frame from our factory and we will offer you the best after-sale service and timely delivery.
• 4" x 2" Compact Size
• 2 x MOPP Compliance
• Protections : Short circuit / Over voltage / Over current / Over temperature
• Energy Efficiency ≥ 90%~93% depends on models
• No Load Power Consumption ≤ 0.3W
• MTBF > 100,000 hours
• Low Leakage Current
• 150W Convection / 200W Forced Air
• Customized Solutions Available
U: Output range
XX: Specified output voltage, i.e. 12 is 12VDC
YY: Differential segmentation
OUTPUT
| Wattage | Output | VAC Universal Input | Frequency | Mechanical Size |
|---|---|---|---|---|
| 130W Convection / 170W Forced Air | 12VDC | 100~240 | 50~60Hz | 101.6L x 50.8W x 29H (mm) |
| 15VDC | ||||
| 24VDC | ||||
| 48VDC | ||||
| 150W Convection / 200W Forced Air | 12VDC | |||
| 15VDC | ||||
| 24VDC | ||||
| 27VDC | ||||
| 48VDC |
NOTE:
1 : Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line.
2 : Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
3 : Max. Power (W) ≥ Vo x Io
• Input Range 100 to 240 VAC
• Frequency 50 to 60Hz
• Input Current ≤ 3.15A
• Inrush Current ≤ 60A/230VAC
• Hold Up Time ≥ 8.3ms
• Turn On Time ≤ 1s
• Short Circuit Protection Auto Recovery
• Over Current Protection Auto Recovery
• Over Voltage Protection Auto Recovery
• Over Temperature Protection Auto Recovery
• Operating Temperature -20 to 50°C
• Storage Temperature -40 to 85°C
• Operating Humidity 10% to 90 %
• Storage Humidity 5% to 95 %
• Mechanical Size: 101.6L x 50.8W x 29H (mm)
• Pin Assignment:
AC Input Connector (CON1) : JST B3P-VH or equivalent
|
Pin No. |
Assignment |
Mating Housing |
Terminal |
|
1 |
AC/L |
JSTVHRor equivalent |
JST SVH-21T-P1.1 or equivalent |
|
2 |
No Pin |
||
|
3 |
AC/N |
DC Output Connector (CON2) : JST B6P-VH or equivalent
|
Pin No. |
Assignment |
Mating Housing |
Terminal |
|
1,2,3 |
+V |
JSTVHRor equivalent |
JST SVH-21T-P1.1 or equivalent |
|
4, 5,6 |
-V |
• Weight: 200g
• Certified for whole series: CB IEC 60601-1, CE EMC(EN 60601-1-2), CB IEC 62368-1, CE EMC(EN 55032+EN 55035), FCC Part 15B
• Complied with ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1, TUV EN 60601-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, TUV EN 62368-1
